FIRST USE

To install the PC Gamer pack in the best possible conditions, make sure you have downloaded the headset configuration software and the mouse programming software.

Download

Mouse

Turn on the computer.

Connect the mouse to the USB port.

For increased performance, use the cable as direct as possible between the mouse and the computer.

The operating system will automatically recognize the mouse.

Change DPI: Short click on DPI button to change from 1200 DPI to 6400 DPI. There are 4 different sensitivity modes. The modes can be adjusted using the software.

Recoil function: 7 categories of weapons can be preset. Continuously press the DPI button and rotate the dial forward and backward to adjust the recoil.

All the mouse parameters are configurable thanks to the software.

Save / download up to 5 configured profiles.

Preset each button with over 30 different actions. Adjust the sensitivity. Configure thumbwheel / click speed

Problem resolution

No pointer movement? Irregular movements? Missing clicks? Check the USB connection. Check that the USB cable is not twisted or pinched. Avoid the use of a USB hub. Try a different USB port on the computer. Make sure the mouse sliding surface is adequate. Reflective or transparent surfaces, such as glass, do not work well. Restart the computer.

KEYBOARD

Turn on the computer.

Connect the keyboard to the USB port.

For increased performance, use the most direct path between the keyboard and the computer.

The software installs automatically after 3 seconds.

Problem resolution

Keyboard isn't detected by the computer? Backlighting doesn't turn on? Check the USB connexion. Make sure the USB cable isn't bent nor pinched. Avoid using a USB hub.Try another USB port on the computer. Restart the computer.

HEADSET

Turn on the computer.

Connect the headset to the USB port. For increased performance, use the most direct path between the headset and the computer.

The software installs automatically after 3 seconds.